0! = 1 n! = n (n-1)! if n >0, else undefinedIn Tcl, we can have it pretty similarly:

proc fact n {expr {$n<2? 1: $n * [fact [incr n -1]]}}But this very soon crosses the limits of integers, giving wrong results.Weekend reading in an older math book showed me the Stirling approximation to n! for large n (at Tcl's precisions, "large" is > 20 ...), so I built that in:

proc fact n {expr { $n<2? 1: $n>20? pow($n,$n)*exp(-$n)*sqrt(2*acos(-1)*$n): wide($n)*[fact [incr n -1]]} }Just in case somebody needs approximated large factorials... But for n>143 we reach the domain limit of floating point numbers. In fact, as Additional math functions points out, the float limit is at n>170, so an intermediate result in the Stirling formula must have busted at 144. For such few values it is most efficient to just look them up in a pre-built table, as Tcllib's

*math::factorial*does.Incidentally, playing with that, I noticed a bug: as table lookup is guarded with

if {$x <= [llength $factorialList]} {return [lindex $factorialList $x]}that function has a blind spot at x=171: it returns "" (list index overrun, should test with < ;-) instead of throwing the error, which it does for x>171...

FPX I have a story to tell on the subject of factorials. In 1993, I was in competition with a friend to come up with the largest factorials. It started when he called me in despair, he was in a bet to show that you could compute 10000!, but his implementation was crapping up. The day after, I mailed him a disk with the full number. The fun part is that he considered C "too slow," yet I kept beating his assembly code by using better algorithms, e.g., by doing all computations "base 10000" (four digits per word), using 32 bit multiplications -- four times faster than using base 100 (two digits per byte). I keep telling this story to warn about the dangers of premature optimization: first get your algorithms right, and only then concentrate on optimizing hot spots.Eventually, I extended my program to work over a network, and had 70 workstations grinding away for 48 hours on the computation of 1000000!. Never was CPU time more pointlessly wasted.So all of the above is peanuts. Try this:

proc fact {n} { set e 0; set m 0 for {set i 2} {$i <= $n} {incr i} { set l [expr {log10(double($i))}] incr e [expr {int(floor($l))}] if {[set m [expr {$m+(fmod($l,1))}]]>=1} { incr e; set m [expr {$m-1}] } } return "[expr {pow(10,$m)}]e$e" } % fact 200 7.88657867365e374 % fact 10000 2.84625968092e35659

Playing Joy of course involves factorial too: see that page for an older, Polish take of mine, where the generic recursion construct

*primrec*can be wrapped as

interp alias {} factorial {} primrec 1 *and, soon on the Wiki in RPN again, the reverse Polish form

rpn /factorial {1 /* primrec} defIt may look strange, but it's valid Tcl... Or see Functional programming for how one can do it with

interp alias {} factorial {} o product iota1

**Factorial puzzle**: From the Tcl chatroom on 2004-08-02:<antirez_>: Many many years ago (at least 12), a computer magazine here launched a price. The goal was to calculate the last non-zero digit of 10000! but the average computer was a 286. Of course the solution was to only care about the latest part of the number but many tried to compute the whole number heesuchenwi:

proc lastnonzero max { set prod 1 for {set i 2} {$i<=$max} {incr i} { set prod [string index [string trimright [expr {$i*$prod}] 0] end] } set prod } % lastnonzero 10000 8Took 933 msec on my 200 MHz box.<antirez_>: suchenwi: haha, good answer!suchenwi: Well, I suppose Tcl's "string think" makes it pretty easy to implement your spec... I tested correctness with some small factorials, so I assume by total induction that 8 is the right answer.<antirez_>: Yeah, your implementation is very smart. And 8 is, I computed the real number with the C version of my libsuchenwi: :D

See also Factorial using event loop

So what would the code look like making use of bignum in pure Tcl? - RS: Like so, for instance:

package require math ;# bignum is in more recent Tcllib proc fac x { set prod [math::bignum::fromstr 1] while {$x>1} { set prod [math::bignum::mul $prod [math::bignum::fromstr $x]] incr x -1 } math::bignum::tostr $prod }Testing:

% fac 100 93326215443944152681699238856266700490715968264381621468592963895217599993229915608941463976156518286253697920827223758251185210916864000000000000000000000000Lars H: The bignum module in infix provides the ! operation (postfix) for factorials and the !! operation for semifactorials. It uses the following recursive procedure (whose first step is to expand n! as n!!*(n-1)!!) to make all multiplications of two roughly equal-sized numbers.

proc xfactorial {k n} { if {[::math::bignum::le $n 1]} then { return 1 } elseif {[::math::bignum::le $n $k]} then { return $n } else { set kk [::math::bignum::add $k $k] ::math::bignum::mul [ xfactorial $kk $n ] [ xfactorial $kk [::math::bignum::sub $n $k] ] } }Ordinary factorials become

proc factorial {n} {math::bignum::tostr [xfactorial 1 [math::bignum::fromstr $n]]}whereas the semifactorial is

proc semifactorial {n} { math::bignum::tostr [xfactorial [math::bignum::fromstr 2] [math::bignum::fromstr $n]] }

This seems to work without problems in Tcl 8.5a6 (obviously: [1]).

for {set x 1; set y 0} {$x<=10000} {incr x} {set y [expr {$x * $y}]} set yConversion to string for printing the number takes about 20 times as long as the calculation itself. Obviously, I won't be pasting the result here.