My House

Keith Vetter 2005-06-15

!!!BROKEN!!!

KPV 2005-07-13: Apparently google has taken down the keyhole website. As Harm Olthof mentions below, Google is publishing their Google Maps api and this was probably a casualty of that.


Can you find your house?

As part of Google Maps, Google recently acquired Keyhole and all its satellite images. This applet lets you view individual images at various locations and zoom levels.

The url to a given images is a quad-tree descent path. Put in English, it's like this:

  1. Start with the whole world: http://kh.google.com/kh?v=1&t=t
  2. Select a quadrant, appending q, r, s or t for top left, top right, bottom right, bottom left.
  3. Repeat

My house is at: http://kh.google.com/kh?v=1&t=tqstqqrtstrqrqq

The 2nd level map is weird--it's swapped vertically and actually represents the entire top or bottom half. I hacked it so that it displays correctly.


RS: Very cool! A pity that they don't have detail maps for my house, but at least you can see Lake Constance on http://kh.google.com/kh?v=1&t=trtqttssq (top right) :)


LV ACK! I tried the above, but after about 5 or 6 selections, I was no longer able to determine where I was on the map, so as to better select the quandrant....


escargo 17 Jun 2005 - I had an interesting problem because the Twin Cities is right near the 45th parallel. It's easy to get on the wrong side of the quadrent. It might be nice if the limits that were shown also included the Lat/Lon of the center of the cross. Also I was able to determine better where to zoom based on the Lat/Lon of my ZIP code, which I found by using this site: [L1 ]. I was able to choose based on the ranges shown in the entry fields.

LV Wouldn't it be nice to tie that zip together with the program, so that someone could type in either their zip code or lat./long. and get the full home URL?

escargo I guess because most of the world doesn't have ZIP codes, I think allowing the entry of a Lat/Lon and then let some algorithm step from the whole world to a small box that contained the supplied values might be interesting. Sort of a "powers of 2" zoom (instead of "Powers of Ten" [L2 ] and [L3 ]).


KPV 17 Jun 2005 - Added two new features. First lets you specify a latitude and longitude point and it will show you which quad it is in.

The second feature is a zoom slide show, showing all the maps from the highest resolution down to the current resolution. You can vary the speed or zoom out.

If anybody is willing, two additional features would be great. First is to automate drilling down to a given location. There's a GUI issue plus figuring out when to stop. The second feature would be to have better transitions for the zoom slide show.

escargo 18 Jun 2005 - Cool. But what's the deal with the "porkchop"?

KPV - For some reason, clicking on the first map returns not the quadrant you clicked in but the entire northern or southern hemisphere. Additionally, the image is swapped vertically.

Harm Olthof - 13 july 2005 - Unfortunatedly, this does not seem to work anymore. Perhaps because Google published an API for Google Maps, recently [L4 ] and you now need to send an API key?


 ##+##########################################################################
 #
 # MyHouse.tcl - gets satellite images from Google at deeper resolution
 # by Keith Vetter, June 15, 2005
 #
 # See About for an explanation. NB. the second stage map is weird
 #

 package require Tk
 package require http
 package require Img

 array set S {title "My House" quad "t" west -180 east 180 north 90 south -90 
    speed 800 url "http://kh.google.com/kh?v=1&t="
    latitude,deg 38 latitude,min 53 latitude,sec 21.96
    longitude,deg -77 longitude,min 2 longitude,sec 6.84
 }
 array set D {0 {south east q} 1 {south west r} 2 {north east t} 3 {north west s}}

 proc DoDisplay {} {
    wm title . $::S(title)
    pack [frame .buttons -relief ridge -bd 2 -padx 5 -pady 5] \
        -side bottom -fill both -ipady 5
    pack [frame .ctrl -relief ridge -bd 2 -padx 5 -pady 5] \
        -side right -fill both -ipady 5 -expand 1
    pack [frame .top -relief raised -bd 2] -side top -fill x
    pack [frame .screen -bd 2 -relief raised] -side top -fill both

    canvas .c -height 256 -width 256 -bd 0 -highlightthickness 0
    label .msg -textvariable ::S(quad) -bd 2 -bg white -relief ridge
    pack .msg -in .screen -side bottom -fill both
    pack .c   -in .screen -side top    -fill both -expand 1

    catch {image delete ::img::map}
    image create photo ::img::map
    .c create image 0 0 -anchor nw -image ::img::map

    .c create line 0 128 256 128 -fill white -dash 1
    .c create line 128 0 128 256 -fill white -dash 1
    .c create rect 0 0 128 128     -outline {} -tag {quad tl}
    .c create rect 128 0 256 128   -outline {} -tag {quad tr}
    .c create rect 0 128 128 256   -outline {} -tag {quad bl}
    .c create rect 128 128 256 256 -outline {} -tag {quad br}

    bind .c <Button-1> [list Click %x %y]
    bind all <Button-3> WhichQuad
    bind all <Key-F2> {console show}
    DoCtrlFrame
    .msg config -font [.undo cget -font]
 }
 proc DoCtrlFrame {} {
    button .undo -text Undo -command Undo
    .undo configure -font "[font actual [.undo cget -font]] -weight bold"
    option add *Button.font [.undo cget -font]
    option add *Scale.font [.undo cget -font]
    button .reset -text Reset -command Reset
    button .slideshow -text "Slide Show" -command DoSlideShow
    button .about -text About -command About

    frame .where
    set row -1 
    foreach v {north equator south east meridian west} {
        if {[incr row] == 3} {incr row}
        label .$v -text "[string totitle $v]:" -anchor e
        label .v$v -textvariable S(p,$v) -bd 2 -relief sunken
        grid .$v .v$v -in .where -sticky ew -row $row
    }
    .equator config -text "Center"
    .meridian config -text "Center"

    grid rowconfigure .where 3 -minsize 10
    grid columnconfigure .where 1 -weight 1

    labelframe .ffind -text "Find Location" -font [.undo cget -font]
    pack .where -in .ctrl -side top -expand 1 -fill x
    pack .ffind -in .ctrl -side bottom -expand 1 -fill x
    grid columnconfigure .ffind {1 2 3} -weight 1
    foreach v {latitude longitude} {
        label .$v -text "[string totitle $v]:" -anchor e
        entry .deg$v -textvariable S($v,deg) -width 3
        entry .min$v -textvariable S($v,min) -width 3
        entry .sec$v -textvariable S($v,sec) -width 6
        grid .$v .deg$v .min$v .sec$v -in .ffind -sticky ew -padx 2
    }
    button .find -text "Which Quad" -command WhichQuad
    grid .find - - - -in .ffind -padx 10 -pady 10 -sticky ew 

    pack .undo .reset .slideshow .about -in .buttons -side left -expand 1
    PrettyLats
 }
 proc Click {x y {noGUI 0}} {
    foreach {lat lon quad} $::D([expr {($x > 128) + 2*($y > 128)}]) break

    set ::S($lon) [expr {($::S(east) + $::S(west))/2.0}]
    if {[string length $::S(quad)] == 2} {;# Level 2 porkchop
        set quad [string map {q t t q r s s r} $quad]
    }
    if {[string length $::S(quad)] != 1} { ;# Level 2 porkchop
        set ::S($lat) [expr {($::S(north) + $::S(south))/2.0}]
    }
    append ::S(quad) $quad
    if {! $noGUI} GetImage
 }
 proc GetImage {} {
    . config -cursor watch
    .c itemconfig quad -fill {} -stipple {}
    set url "$::S(url)$::S(quad)"
    set token [::http::geturl $url]
    ::http::wait $token
    set data [::http::data $token]; list
    ::http::cleanup $token
    ::img::map config -data $data
    if {[string length $::S(quad)] == 2} SwapHalves ;# Level 2 porkchop

    SlideShowSave

    PrettyLats
    . config -cursor {}
    .undo config -state [expr {$::S(quad) eq "t" ? "disabled" : "normal"}]
 }
 proc PrettyLats {} {
    set ::S(meridian) [expr {($::S(east) + $::S(west))/2.0}]
    set ::S(equator) [expr {($::S(north) + $::S(south))/2.0}]

    foreach v {north south east west meridian equator} {
        set ::S(p,$v) [PrettyLat $::S($v)]
    }
 }
 proc PrettyLat {lat} {
    set deg [expr {int($lat)}]
    set frac [expr {($lat - $deg)*60}]
    set min [expr {abs(int($frac))}]
    set sec [expr {abs(($frac - int($frac))*60)}]
    return [format "% 3d\xB0 %02d' %.2g\x22" $deg $min $sec]
 }
 proc Reset {} {
    array set ::S {quad "t" west -180 east 180 north 90 south -90}
    GetImage
 }
 proc SwapHalves {} {  ;# Level 2 porkchop
    image create photo ::img::tmp -width 256 -height 256
    ::img::tmp copy ::img::map -from 0 0 256 128 -to 0 128
    ::img::tmp copy ::img::map -from 0 128 256 256 -to 0 0
    ::img::map copy ::img::tmp
    image delete ::img::tmp
 }
 proc Undo {} {
    array set Q {q {0 0} r {200 0} s {200 200} t {0 200}}
    set quads [split [string range $::S(quad) 1 end-1] ""]
    array set ::S {quad "t" west -180 east 180 north 90 south -90}

    set cnt -1
    foreach quad $quads {
        incr cnt
        set q $quad
        if {$cnt == 1} {                        ;# Level 2 porkchop
            set quad [string map {q t t q r s s r} $quad]
        }
        foreach {x y} $Q($quad) break
        Click $x $y 1

    }
    GetImage
 }
 proc About {} {
    set msg "$::S(title)\nby Keith Vetter, June 15, 2005\n\n"
    append msg "Can you find your house?\n\n"
    append msg "This applet lets you view satellite images from\n"
    append msg "Google's recently Keyhole imagery data set.\n\n"
    append msg "The url for an actual image represents a quad-tree\n"
    append msg "descent path. Put in English, it's like this:\n"
    append msg "  o start with the whole world:\n"
    append msg "     http://kh.google.com/kh?v=1&t=t\n"
    append msg "  o select a quadrant, adding q, r, s or t to the URL\n"
    append msg "     for top left, top right, bottom right, bottom left\n"
    append msg "  o repeat\n\n"
    append msg "My house is at:\n"
    append msg "      http://kh.google.com/kh?v=1&t=tqstqqrtstrqrqq"

    tk_messageBox -title "About $::S(title)" -message $msg
 }

 proc WhichQuad {} {
    .c itemconfig quad -fill {} -stipple {}
    set lat [ReadLat latitude]
    set lon [ReadLat longitude]
    while {1} {
        if {! [string is double $lat] || abs($lat) > 90} break
        if {! [string is double $lon] || abs($lon) > 180} break
        set tag [where $lat $lon]
        if {$tag eq ""} break
        .c itemconfig $tag -fill white -stipple gray12
        return
    }
    .ffind config -bg red
    .find config -bg red
    update
    after 300
    .ffind config -bg [lindex [.ffind config -bg] 3]
    .find config -bg [lindex [.find config -bg] 3]
 }
 proc where {wlat wlon} {
    global S

    if {$wlat > $S(north) || $wlat < $S(south)} { return }
    if {$wlon > $S(east) || $wlon < $S(west)} { return }
    set top [expr {$wlat >= $S(equator) ? "t" : "b"}]
    set left [expr {$wlon >= $S(meridian) ? "r" : "l"}]
    return "$top$left"
 }
 proc ReadLat {who} {
    global S

    foreach v {deg min sec} {
        set val [string map {" " ""} $S($who,$v)]
        set val [string map -nocase {N "" S - E "" W -} $val]
        if {$val eq ""} {set val 0}
        if {! [string is double -strict $val]} {return "bad"}
        set $v $val
    }
    if {$deg < 0} {
        set ll [expr {$deg - $min/60.0 - $sec/60.0/60.0}]
    } else {
        set ll [expr {$deg + $min/60.0 + $sec/60.0/60.0}]
    }
    return $ll
 }

 proc SlideShowSave {} {
    set len [string length $::S(quad)]
    set iname ::img::map$len
    if {[lsearch [image names] $iname] == -1} {
        image create photo $iname
    }
    $iname copy ::img::map
 }
 proc DisplaySlideShow {} {
    set W .slide
    if {[winfo exists $W]} return

    toplevel $W
    wm title $W "$::S(title) Slide Show"
    wm transient $W .
    label $W.l -image ::img::map1
    pack $W.l

    scale $W.speed -orient h -label Speed -showvalue 0 -bd 2 -relief ridge \
        -variable S(speed) -from 2000 -to 10 -length 75
    button $W.in -text "Zoom In" -command [list DoSlideShow in]
    button $W.out -text "Zoom Out" -command [list DoSlideShow out]
    pack $W.speed $W.in $W.out -side left -expand 1

    set y [expr {3 + [winfo y .]}]               ;# Top of main window
    set x [expr {15 + [winfo x .] + [winfo width .]}] ;# Right side

    if {$x + [winfo reqwidth $W] > [winfo screenwidth .]} {
        wm geom $W -10+$y        ;# Nope, put on right edge
    } else {
        wm geom $W +$x+$y
    }
 }
 proc DoSlideShow {{dir in}} {
    DisplaySlideShow
    .slide.in config -state disabled
    .slide.out config -state disabled
    set max [string length $::S(quad)]
    if {$dir eq "in"} {
        StepSlideShow 1 $max 1
    } else {
        StepSlideShow $max $max -1
    }
 }
 proc StepSlideShow {step max dir} {
    .slide.l config -image ::img::map$step
    incr step $dir
    if {$step <= $max && $step > 0} {
        after $::S(speed) [list StepSlideShow $step $max $dir]
    } else {
        .slide.in config -state normal
        .slide.out config -state normal
    }
 }

 DoDisplay
 Reset
 update
 wm geom . [wm geom .]

 return

uniquename 2013aug19

For readers who do not have the time/facilities/whatever to setup this code and then execute it, here is an image of this 'My House' GUI.

vetter_MyHouse_wiki14330_screenshot_479x361.jpg

Since I do not have the 'http' or 'Img' packages on my computer(s), I commented out the checks for those two packages at the top of the code. And I dummied out the 'GetImage' proc by putting a 'return' statement at the top of that proc --- to avoid an error that kept the GUI from starting up.

So the GUI is missing an image that was supposed to show up --- but at least this image shows the general layout of the GUI produced by this code.